Welcome to the era of 3D printing, with this machine you can start printing immediately and get off to a good start in the world of 3D printing. 3D CPI HOME This is a small printer ideal for those who want to get started in the world of 3D printing but do not have the time to assemble a kit for themselves.
Get clean prints and a high quality finish, you will be surprised by the finishes that can be achieved with this machine.
Get the best out of your 150x150x150 print volume.
With its direct head of 1.75mm, able to reach 260ºC there will be few materials that resist you: PLA, ABS, PETG, HIPS, even Flexible!
These materials could not be worked but for its warm aluminum bed capable of reaching 120 ° C.
Prints are made by micro SD card; therefore you do not need a computer connected to operate.
|Printer Volume :||150 x 150 x 150 mm|
|Weight (kg) :||10 kg|
|Dimensions (mm) :||315 x 335 x 375 mm|
|X Y Axis Movement :||Independent XYZ|
|Maximum Print Speed :||120 mm/s|
|Maximum Movement Speed (mm/s) :||120 mm/s|
|Z Axis Movement :||Trapezoidal spindle|
|Minimum layer tickness (mm) :||0,1 mm|
|XYZ Precision (mm) :||0,01 mm|
|Number of Extruders supported :||1|
|Nozzle Diameter (mm) :||0,4 mm|
|Extrusion System :||Direct|
|Nozzle Temperature (ºC) :||max. 260 (ºC)|
|Filament Diameter (mm) :||1,75 mm|
|Filament Detector :||No|
|Hot Bed :||Yes|
|Hot Bed Maximum Temperature (ºC) :||120 ºC|
|Materials :||PLA -ABS- POM -NYLON- HIPS|
|Operating Systems :||Windows, Linux, Mac OS, OSX|
|Software :||Cura, Simplify 3D, Repetier-Host|
|Formats :||STL, OBJ, GCode, Amf|
|Print From :||Micro SD Card- USB|
|Screen :||LCD Screen|
|Automatic Shutdown :||No|
|Chip :||Atmega 2560|