3D IM-2420 printer
Welcome to the world of 3D printing with IM-2420, with this machine you can start printing immediately and get off to a good start in the world of 3D printing. It is a home printer for those who want to start in the world of 3D printing.
Get clean prints with a high quality finish, you will be surprised by the finishes that can be achieved with this machine.
Take the most out of your print volume of 240x200x200 mm.
With its direct head of 1.75mm, you can print materials such as: PLA, ABS, PETG, HIPS, FLEXIBLE.
You could not work with these materials if not for its hot bed capable of reaching 120 º C.
The prints are made by SD card, therefore you do not need a connected computer to work.
|Printer Volume :||240 x 200 x 200 mm|
|Weight (kg) :||19 kg|
|Dimensions (mm) :||400 x 370 x 390 mm|
|X Y Axis Movement :||Independent XYZ|
|Maximum Print Speed :||120 mm/s|
|Maximum Movement Speed (mm/s) :||120 mm/s|
|Z Axis Movement :||Husillo|
|Minimum layer tickness (mm) :||0,1 mm|
|XYZ Precision (mm) :||0,1 mm|
|Number of Extruders supported :||1|
|Nozzle Diameter (mm) :||0,4 mm|
|Extrusion System :||Direct|
|Nozzle Temperature (ºC) :||max. 260 (ºC)|
|Filament Diameter (mm) :||1,75 mm|
|Filament Detector :||No|
|Hot Bed :||Yes|
|Hot Bed Maximum Temperature (ºC) :||120 ºC|
|Operating Systems :||Windows, Linux, Mac OS, OSX|
|Software :||Cura, Simplify 3D, Repetier-Host|
|Formats :||STL, OBJ, GCode, Amf|
|Print From :||SD Card - USB|
|Screen :||LCD Screen|
|Automatic Shutdown :||No|
|Chip :||Atmega 2560|