In 3DCPI we present a material that will revolutionize the way of printing with support material.
We have developed a material soluble in 1.75 mm and 3.00 mm with great advantages over the materials of support on which you were working previously.
Our Water Soluble 3DCPI filament is soluble in hot water from 60 Cº, it can dissolve in about 20-30 minutes. You can add a little alcohol to facilitate the dissolution of material.
It is a material closely related to conventional printing materials: PLA, ABS, and PETG among others. It is very easy to print as well as having good adhesion between materials giving clean and uniform surfaces on a support.
You need to use warm bedding.
Recommended for those places where the stand cannot be removed manually.
It is possible to use this material as the main printing material.
Does not require the use of solvents
It is necessary to use of lacquer on the printing surface.
| Density : | - |
| Melting Point : | 200°C |
| Dscomposition Temperature : | 260°C |
| Printed Recommended Temperature : | 230±10°C |
| Distorsion Temperature : | 60-100°C(Dissolution) |
| Hot Bed Maximum Temperature (ºC) : | 60 ºC |
| Dissolution Time : | 10 to 30 Minuts |
| Compatibility : | ABS-PLA-PETG |
Accessories
Related Products
Accept 
Logout