24,00 € tax incl.
With a printing temperature of 240 ± 10 ºC, the PETG has come to stay and is that it is a filament that offers all the printing facilities with incredible mechanical characteristics. It will become without doubt in one of your essential filaments.
2. Little shrinkage...
- 140 Item Items
- In stock
The PETG, polyethylene glycol terephthalate is ideal for printing pieces that are very resistant to breakage and have a very smooth and uniform surface finish.
It provides very strong printed parts with a high adhesion between layers, which means that the printed parts are much more resistant between layers and the breaks will not occur along a layer, if not throughout the piece.
Resist the attack of different chemical agents.
It does not absorb water.
Low shrinkage (no warping or break between layers)
You need to use warm bedding.
It is necessary to use lacquers for 3D printing
It is a material that we recommend to test without a doubt.
|Density :||1,27 g/cm³ (23°C)|
|Melt Index :||-|
|Melting Point :||200°C|
|Dscomposition Temperature :||280°C|
|Printed Recommended Temperature :||230±10°C|
|Distorsion Temperature :||80°C|
|Impact Resistence :||50kg- cm/cm|
|Tolerance :||1,75±0,03 / 3,00±0,05|