With our new PLA PRO you can improve the quality of your prints without leaving aside the functionality; since you will be able to realize pieces with a resistance able to rival against any filament 3D thanks to its great adhesion between layers.
PLA, Polylactic Acid, is a biodegradable thermoplastic polymer obtained from corn starch, potato, yuka or sugar cane. It is by far the most used material in 3D FDM printing. The PLA PRO arrives as an improvement of the PLA PLUS, offering better finishes, a greater adhesion between layers and mechanical resistance.
No need to use hot bed.
It requires the use of lacquer on the printing surface.
| Density : | 1,27 g/cm³ (23°C) |
| Printed Recommended Temperature : | 210±10°C |
| Distorsion Temperature : | 70°C |
| Speed : | 120mm/s |
| Tolerance : | 1,75±0,03 / 3,00±0,05 |
| Heat bed temperature : | 45-60ºC |
| Packing dimensions : | 235 x 215 x 80 mm |
| Packing weight : | 1.45 kg approx. |
| Tensile strength : | 59-66MPa |
| Elongation at Break : | 5-8% |
| Blending Strenght : | 65-75Mpa |
| Flexural Madulus : | 2100-2300Mpa |
| Unnotched Impact Strength : | 25-30 Kj/m2 |
Download
Accessories
Related Products
Accept 
Logout